Categories

Login

    Username / Email:
    Password:

Brands

PULLERS & EXTRACTION TOOLS

PULLERS & EXTRACTION TOOLS
  • OTC 4530 Power Steering Pump Pulley Service Set

    OTC 4530 Power Steering Pump Pulley Service Set

    A complete set of tools required to remove and install power steering pump pulleys of most domestic vehicles. Fits pulley hubs with diameters of 1-1/8", 1-1/4", 1-5/16" and 1-3/8". More Info
    0 Review(s)
  • OTC 13-3/8" Bearing Splitter

    OTC 13-3/8" Bearing Splitter

    Features "knife-like" edges which are easily placed behind the part to secure a gripping surface, even when clearances are extremely limited. When used with an OTC Grip-O-Matic® puller, puller jaws grip attachment's outer edge; when used with a Push-Pulle More Info
    0 Review(s)
  • OTC 8" Bearing Splitter

    OTC 8" Bearing Splitter

    Features "knife-like" edges which are easily placed behind the part to secure a gripping surface, even when clearances are extremely limited. When used with an OTC Grip-O-Matic® puller, puller jaws grip attachment's outer edge; when used with a Push-Pulle More Info
    0 Review(s)
  • OTC 9" Bearing Splitter

    OTC 9" Bearing Splitter

    Features "knife-like" edges which are easily placed behind the part to secure a gripping surface, even when clearances are extremely limited. When used with an OTC Grip-O-Matic® puller, puller jaws grip attachment's outer edge; when used with a Push-Pulle More Info
    0 Review(s)
  • OTC Bearing Splitters

    OTC Bearing Splitters

    Features "knife-like" edges which are easily placed behind the part to secure a gripping surface, even when clearances are extremely limited. When used with an OTC Grip-O-Matic® puller, puller jaws grip attachment's outer edge; when used with a Push-Pulle More Info
    0 Review(s)
  • OTC Bearing Splitter

    OTC Bearing Splitter

    Features "knife-like" edges which are easily placed behind the part to secure a gripping surface, even when clearances are extremely limited. When used with an OTC Grip-O-Matic® puller, puller jaws grip attachment's outer edge; when used with a Push-Pulle More Info
    0 Review(s)
  • OTC Bearing Pulling Attachment

    OTC Bearing Pulling Attachment

    Features "knife-like" edges which are easily placed behind the part to secure a gripping surface, even when clearances are extremely limited. When used with an OTC Grip-O-Matic® puller, puller jaws grip attachment's outer edge; when used with a Push-Pulle More Info
    0 Review(s)
  • SCHLEY 51 Piece Master Harmonic Damper Pulley Puller Set- 4 kits in one

    SCHLEY 51 Piece Master Harmonic Damper Pulley Puller Set- 4 kits in one

    This kit accommodates a multitude of applications that include, but are not limited to, 2018 and later Ford® Coyote engines, as well as various models and production years of GM®/Chevrolet® and other vehicles equipped with 3- and 6-spoke pulleys. Many For More Info
    0 Review(s)
  • LANG 5238 Master Power Steering Pulley Remover and Installer Set

    LANG 5238 Master Power Steering Pulley Remover and Installer Set

    Designed to remove and install press-on-type belt-driven accessory pulleys found on most major domestic vehicle platforms. Includes components necessary to use on pumps with the common 3/8"-16 threaded shaft. Applications include: GM Quad 4, GM 3.1L and More Info
    0 Review(s)
  • KUKKO 204-V 2-jaw Puller Cobra for Inner Races with Side Clamp

    KUKKO 204-V 2-jaw Puller Cobra for Inner Races with Side Clamp

    Adapter fits on all common axial holes, e.g. on VAG and other models. Puller hooks are specially hardened and smoothed. With integrated clamp. Mechanical pressure screw. Milled thread treated with special coating. When the tension clamp is tightened, the More Info
    0 Review(s)
  • OTC 4531 Harmonic Balancer Puller/Installer Set

    OTC 4531 Harmonic Balancer Puller/Installer Set

    For easy removal and installation of most harmonic balancers and drive pulleys which are press-fitted onto the crank-shaft. A bearing-centered circular 2/3-way puller flange handles 2 ½” – 4 ¼” bolt circles. An assortment of metric and fractional bolts More Info
    0 Review(s)
  • GEARWRENCH 41710 3 Pc. Rear Axle Bearing Puller Set

    GEARWRENCH 41710 3 Pc. Rear Axle Bearing Puller Set

    Three pullers designed to make the removal of semi-floating rear axle bearings easier 1" x 1-7/8" puller 1-5/16 " x 2-3/8" puller 1-3/8" x 2-7/8" puller 5/8" - 18 threads Includes blow mold case for storage and organization More Info
    0 Review(s)
  • GEARWRENCH 3/8" Drive Stud Removal Socket 10mm

    GEARWRENCH 3/8" Drive Stud Removal Socket 10mm

    Designed and tested to reach studs in difficult work areas Manufactured from alloy steel for better strength and longer tool life Corrosion resistant finish Designed for use with a 3/8" square drive tool More Info
    0 Review(s)
  • GEARWRENCH 41760D 8 Pc. SAE/Metric Stud Removal Set

    GEARWRENCH 41760D 8 Pc. SAE/Metric Stud Removal Set

    SAE and metric stud remover set Designed and tested to reach studs in difficult work areas Includes four popular SAE sizes Includes four popular metric sizes Includes blow mold case for storage and organization More Info
    0 Review(s)
  • GEARWRENCH Universal Nut Cracker 7/16" to 3/4"
    0 Review(s)