Astro 7801 7pc. Sensor & Sending Unit Socket Set
1″ & 1-1/16″ Oil Pressure Sending Unit Socket Includes a 1″ and 1-1/16″ hex which allows the removal of oil pressure sending units. Special deep design fits switches up to 2-5/8″. Designed to be used with a 3/8″ drive tool or 1-1/8″ wrencch
$69.28
Out of stock
- 1″ & 1-1/16″ Oil Pressure Sending Unit Socket Includes a 1″ and 1-1/16″ hex which allows the removal of oil pressure sending units. Special deep design fits switches up to 2-5/8″. Designed to be used with a 3/8″ drive tool or 1-1/8″ wrench.
- 1-3/16″ Oil Pressure Sending Unit Socket
- Allows the removal of oil pressure sending units on late 1980 and mid 1990 GM vehicles. Designed to be used with 1/2″ drive tool.
- 1-1/16″ GM Thermal Sensor Switch Socket
- Allows the removal and installation of thermal sensor switch on 1973 – 1977 GM vehicles. Designed to be used with 1/2″ drive tool.
- 7/8″ Heated Oxygen Sensor Socket
- Socket designed with slot in socket which accommodates the connectors on heat oxygen sensors. Socket has a double 1/2″ drive for easy access.
- 7/8″ Low Profile Offset Oxygen Sensor Socket
- Low profile design for use in tight spaces. Designed to be used with 3/8″ drive tool.
- 7/8″ Oxygen Sensor Socket
- Socket designed to remove and install oxygen sensors in most domestic and many imported vehicles. Socket designed with slot which allows clearance of wire. Designed to be used with a 3/8″ drive tool or 1″ wrench.
- 7/8″ Universal Vacuum PVS, TVS Valve and Oxygen Sensor Socket
- Designed to remove and install vacuum switches with a 7/8″ hex and some oxygen sensors. Designed to be used with 3/8″ drive tool or with a 1″ wrench.
- Made of Cr-V
Additional information
| Weight | 4.8 lbs |
|---|
Reviews
There are no reviews yet.